![]() |
|
|||||||||||||||||
Johnson-Nyquist noise(Redirected from Johnson noise)
Johnson-Nyquist noise (sometimes thermal noise, Johnson noise or Nyquist noise) is the noise generated by the equilibrium fluctuations of the electric current inside an electrical conductor, which happens without any applied voltage, due to the random thermal motion of the charge carriers (the electrons). It is to be distinguished from shot noise, which consists of additional current fluctuations that occur when a voltage is applied and a macroscopic current starts to flow. For the general case, the above definition applies to charge carriers in any type of conducting medium (e.g. ions in an electrolyte). The thermal noise power, P, in watts, is given by P = 4kBTΔf, where kB is Boltzmann's constant in joules per kelvin, T is the conductor temperature in kelvins, and Δf is the bandwidth in hertz. Thermal noise power, per hertz, is equal throughout the frequency spectrum, depending only on kB and T. It is white noise, in other words. In communications, noise power is often used. Thermal noise at room temperature can be estimated in decibels as:
Where P is measured in dBm (0 dBm = 1 mW) and Δf is bandwidth in Hz. For example:
Electronics engineers often prefer to work in terms of noise voltage across the resistor (en) and noise current (in) going through the resistor. These also depend on the electrical resistance, R, of the conductor: Thermal noise is intrinsic to all resistors and is not a sign of poor design or manufacture, although resistors may also have excess noise. See also
References
External links
The contents of this article are licensed from Wikipedia.org under the GNU Free Documentation License.
How to see transparent copy 01-04-2007 01:21:04 |
|





